Saturday 20 September 2014

Benefits of Steel and Aluminium Garage Doors Perth



Garage doors differ from entry doors in that function is more important than form. Where wood is the commonest material used to construct patio and back doors, metal in the likes of steel and aluminium are preferred for garages. Why is this so? Why cannot garage doors be made of wood or even vinyl?

Unlike entry doors which are tiny & simple to personalize with decorations & hardware, Garage Door Parts Perth doors need to be heavy & sturdy. Low maintenance is a feature that is prized because homeowners don't need to spend on repairs every so often. Garage contents are also expensive with cars & bikes figuring in to thousands of dollars. If burglars can gain entry with no trouble then the whole point of placing vehicles in garages is negated.

Low upkeep & anti-theft properties are not the only factors. Where the main parts of the house are properly insulated to increase living comfort, garages tend to be left unfurnished (unless converted in to a livable room) & insulation, heating & cooling don't normally extend to them. With metal doors & modern construction techniques, the inside can be kept a lot drier & warmer or cooler depending on the weather.

Of the numerous metals that can be fabricated, steel and aluminium are favourites for their strength, durability and affordable cost.

Steel: Steel trumps even over aluminium. Known for its high strength top quality steel with 24-gauge panels, there is not a lot burglars or disagreeable weather can do to bring it down. The construction technique plays a role with some doors featuring thicker steel on the outside for a formidable finish.

Modern steel doors are also customizable either by using paint or tinkering with the design. Paint jobs can mimic the look of wood grain and stone but without the weaknesses suffered by the.

The best steel door is which promises insulation and is thick to guard against the cold, rain and impact. The addition of security alarms enhances the protection offered by this long lasting material.

Aluminium: With aluminium, doors are lighter & the use of powerful door openers is unnecessary. The light weight does tiny to affect strength & durability. Customization options are varied with finishes ranging from wood to stone.

Aluminium is cheaper than steel so it is no wonder it is the most used garage door material. However, being light, it is more liable to dents so repair jobs are to be expected. The same light weight makes it simple to put in, though, unlike steel which is heavy & needs stronger support.

Whichever metal is selected, design influences how well garage doors match up to wear and tear. The insulation used also plays a role with polyurethane having a higher 'R' value despite appearing thinner than polystyrene.

Safety features such as pinch-resistant doors and tamper-resistant brackets can minimize the risks posed to the fingers, an important feature if there's children in the house where boisterous activity can see them get up to mischief.

Well-chosen garage doors enhance curb appeal which can in turn affect the resale value of property. Color-coded doors that match the entry doors & trim of a structure - a house - see buyers more inclined to favor such property. So if you have been wondering what type of door to get & the way it can beautify your actual estate, think about the tips given here.

Garage doors are as important as the contents inside the garage. Make sure you install automatic garage roller doors available in WA on your garage for the safekeeping of your precious automobile. Click here to know about designers garage doors.

A1 Doors Perth can be contacted at 1300 557 805. They provide garage door repair, garage door installation & garage door service of any kind in Perth, Southern River, Beeliar and Canning Vale.

Follow: Twitter | Facebook | Google+

Monday 8 September 2014

Garage Door Repair Perth- 5 Simple Things to Check



Some repairs are simple for example a stiff or a squeaky door will merely need a nice cleaning and lubrication. Other repairs, such as repairing a torsion spring, are very risky and need help from a professional.

Before proceeding to the repair, make sure to unplug your garage door opener, so that you do not get an electric shock while you are repairing your garage door. You will most likely be standing on a ladder, which is a bad place to get an electric shock, since you may also fall off the ladder. Also, keep in mind to wear safety glasses when working with power tools.


Things to check before calling for a professional for your Garage Door Repair Perth:

1. Check the Metal Tracks for Damages

This straightforward garage door repair tip may often solve the issue fast. The metal tracks often may have dents or bumps. In case you find any such damages, strike the damaged part of the track with a wood block as well as a hammer to straighten the track.

2. Check the Alignment of the Tracks

If the tracks are not aligned well, they may be causing the door not to work. It is not always necessary to unscrew the tracks; you can try to loosen the bolts or screws and to tap the tracks slightly in to position. Use a level to check the alignment of the tracks. Aligned tracks will let you be done along with your garage door repair in no time.

3. Tidy & Dry the Tracks

Although it may sound obvious, but hardened dirt & elderly oil may be the reason for the garage door sticking. In this case, your garage door repair may consist of merely cleaning the tracks & then drying them. You can use regular cleaners to tidy the tracks.

4. Oil the Tracks and the Rollers

Merely oiling both, the tracks and the rollers, can fix the issue and conclude your garage door repair in no time. For lubrication, you may use an oil spray or a silicon spray. It is probably better to oil the tracks after cleaning them. Actually, any movable part will benefit from lubrication.


5. Tightening the Loose Bolts & Screws

Bolts & screws tend to become loose with time. Try to check all of the screws & bolts involved in the opening/closing mechanism of your door. Sometimes, merely tightening them may solve the whole issue. In the event you cannot tighten the screws, because the holes themselves have become loose, then you can use a "wood filler" or pieces of normal wood to fill the holes.

What Not to Do?

In case you have tried every of the above solutions, and none of them have worked, the issue may be the door spring. However, it is advised not to perform your garage door repair if the issue appears to be the spring, if it is a torsion spring. Regrettably, there have been numerous cases, where people have gotten injured or even killed by the garage door springs. One of the most common injuries is a hit in the head, leading to serious trauma to the brain.

A1 Doors Perth can be contacted at 1300 557 805. They provide garage door repair, garage door installation & garage door service of any kind in Perth.

Follow: Twitter | Facebook | G+

Sunday 7 September 2014

Garage Door Repair Perth- Problems and Fixes



A garage door is one of the basic and most important requirements of your everyday life. When you get prepared for your office & open the door to your garage with a flick of your garage gate opener remote, you seldom recognize what an essential tool it is. However, when something goes wrong along with your garage gate opener & you have no option of getting to your automobile, & you are getting late to your office. Thus, when your garage gate begins to malfunction, it is important that you perform the garage door repair at the soonest.

Garage Door Repairs Perth is not hard and you can perform the repairs yourself in the event you are lovely with tools. However, in the event you are not sure of yourself, do not try to do the garage repair yourself, as you could hurt yourself.

What are the various issues that you can face along with your garage door?

·         Does not reply to the opener remote at all
·         The garage gate opener runs, but does not work
·         The garage gate opens & closes partially
·         You need to work hard to get the door to open

If you are facing any of these issues, you shall have to start away with the garage gate repair right now.

The garage door repair usually involves some testing of the condition of the motors, replacing the batteries of the garage gate opener, oiling the machinery, as well as aligning the machine in the right manner.
garage door repairs Perth

Before beginning the repair works, you ought to check the power supply, because you require continuous power supply to check if your garage door is working right. Next, you require finding out the technique on which your garage door works. There are types of spring technique openers. The standard extension garage gate is simplest to repair. If this is the type of garage gate you have, check for broken cables and pulleys as well as broken springs and rollers.

If your process used a torsion spring, you need to call in a professional. This is because such a garage entrance opener is large and mounted over the door and you may hurt yourself while trying to perform the garage door repair.



In case you need a temporary fix for your garage entrance opener, you should use of the red cord that hangs from your opener. Pulling this cord will disconnect the opener from the door and now you can by hand open the door. If however, the spring of the opener is broken, the door might shut suddenly, so be cautious to keep your children or pets away from the door when you are carrying out the garage door repair.

If however you feel that the issue lies with the garage door tracks & not with the opener, you may call the manufacturer for a replacement of the garage door parts. Take care to read the manufacturer's guide properly, so that you can repair the doors with ease.

A1 Doors Perth can be contacted at 1300 557 805. They provide garage door repair, garage door installation & garage door service of any kind in Perth.

Follow: Twitter | Facebook | G+