Garage Door Repair Perth- 5 Simple Things to Check

Some repairs are simple for example a stiff or a squeaky door will merely need a nice cleaning and lubrication. Other repairs, such as repairing a torsion spring, are very risky and need help from a professional.

Before proceeding to the repair, make sure to unplug your garage door opener, so that you do not get an electric shock while you are repairing your garage door. You will most likely be standing on a ladder, which is a bad place to get an electric shock, since you may also fall off the ladder. Also, keep in mind to wear safety glasses when working with power tools.

Things to check before calling for a professional for your Garage Door Repair Perth:

1. Check the Metal Tracks for Damages

This straightforward garage door repair tip may often solve the issue fast. The metal tracks often may have dents or bumps. In case you find any such damages, strike the damaged part of the track with a wood block as well as a hammer to straighten the track.

2. Check the Alignment of the Tracks

If the tracks are not aligned well, they may be causing the door not to work. It is not always necessary to unscrew the tracks; you can try to loosen the bolts or screws and to tap the tracks slightly in to position. Use a level to check the alignment of the tracks. Aligned tracks will let you be done along with your garage door repair in no time.

3. Tidy & Dry the Tracks

Although it may sound obvious, but hardened dirt & elderly oil may be the reason for the garage door sticking. In this case, your garage door repair may consist of merely cleaning the tracks & then drying them. You can use regular cleaners to tidy the tracks.

4. Oil the Tracks and the Rollers

Merely oiling both, the tracks and the rollers, can fix the issue and conclude your garage door repair in no time. For lubrication, you may use an oil spray or a silicon spray. It is probably better to oil the tracks after cleaning them. Actually, any movable part will benefit from lubrication.

5. Tightening the Loose Bolts & Screws

Bolts & screws tend to become loose with time. Try to check all of the screws & bolts involved in the opening/closing mechanism of your door. Sometimes, merely tightening them may solve the whole issue. In the event you cannot tighten the screws, because the holes themselves have become loose, then you can use a "wood filler" or pieces of normal wood to fill the holes.

What Not to Do?

In case you have tried every of the above solutions, and none of them have worked, the issue may be the door spring. However, it is advised not to perform your garage door repair if the issue appears to be the spring, if it is a torsion spring. Regrettably, there have been numerous cases, where people have gotten injured or even killed by the garage door springs. One of the most common injuries is a hit in the head, leading to serious trauma to the brain.

A1 Doors Perth can be contacted at 1300 557 805. They provide garage door repair, garage door installation & garage door service of any kind in Perth.

Follow: Twitter | Facebook | G+